Stainless Steel Industrial Pressure Sensor Transmitter Versatile
and Compact Design for Easy
BP93420I Pressure Transmitter
Introduction of industrial pressure sensor transmitter:
The BP93420-I Diffused silicon Industrial Pressure Sensor
Transmitter is a flexible device renowned for its precision and
trustworthiness. Its cutting-edge technology ensures accurate
pressure detection. The sensor possesses an expansive measurement
range and can be employed in an array of applications with
differing pressure magnitudes.
Product Features of industrial pressure sensor transmitter:
- The sensor features a wide measuring range, a stainless steel
construction, and diverse pressure interface options.
- The design is compact and lightweight.
- The zero and full-scale are adjustable.
- The sensor offers high precision and an all-stainless steel
construction.
Applications of industrial pressure sensor transmitter:
1. Pressure measurement of non-corrosive gases and liquids with
316L stainless steel.
2. Applied in the marine and aviation industries.
3. Used in industrial on-site processes such as petroleum,
chemical, metallurgy, power generation, and hydrology.
4. Utilized in hydraulic and pneumatic control systems.
| Performance Parameters : |
| Measurement Range | -100kPa…0kPa ~ 10kPa…60MPa |
| Pressure Type | Gauge Pressure, Absolute Pressure, Sealed Pressure |
| Overload | ≤ 1.5 times of the rated range |
| Accuracy @ 25ºC | ±0.25% (Typical) ±0.5% (Maximum) |
| Repeatability | 0.1%FS |
| Hysteresis | 0.1%FS |
| Long-Term Stability | ±0.1%F.S/Year(Typical) ±0.2%F.S/Year(Maximum) |
| Zero Point Temperature Drift | ±0.03%F.S/ºC(≤100KPa) ±0.02%F.S/ºC(>100KPa) |
| Full Scale Temperature Drift | ±0.03%F.S/ºC(≤100KPa) ±0.02%F.S/ºC(>100KPa) |
| Compensation Temperature | 0-70ºC(≤10mpa,customizable) |
| Operating Temperature | -20ºC~80ºC |
| Storage Temperature | -40ºC~120ºC |
| Vibration | 10g,55Hz ~ 2kHz |
| Housing Material | 304,316L |
| Diaphragm Material | 316L |
| Insulation Resistance | 100MΩ 100VDC |
| Explosion-proof Rating | Ex ia IIC T6 Ga |
| Protection Rating | IP65 |
| O-Ring Seal | Fluoro rubber |
| Weight | ~0.25kg |
| Output Signal | Supply Voltage | Output Type |
| 4~20mA | 12~30VDC | 2/3/4 wire |
| 0~10/20mA |
3 wire |
| 0/1~5V |
| 0/1~10V |
| 0.5~4.5V | 5VDC |
Odering Tips:
- When selecting the product, please ensure that the measured medium
is compatible with the contacting components of the product.
- To ensure the reliable operation of the product, you are advised to
install lightning protection devices on site and ensure that the
product and power supply are reliably grounded.
- The rated operating temperature range of the fluorine rubber O-ring
is -20°C to 250°C. When the operating temperature of the product is
lower than -20°C, an EPDM O-ring seal should be selected.
- The cable is not included by default, and there are three material
options to choose from if necessary. If there are no special
instructions, polyethylene cable materials can be used. If you need
a different cable material, please specify it in the order form.
- In case of strong vibration, instantaneous impact, strong
electromagnetic or radio frequency interference, and other special
requirements, please let us know and indicate it in the order form.
| Order Guide |
| BP93420XX | Pressure Transmitter |
| Code | Outline Construction |
| IB | General Pressure Transmitter | IX | Display Pressure Transmitter |
| IE | Shock-resistant Aviation Pressure Transmitter | IIC/III | Industrial General/ Display Pressure Transmitter |
| IF | Moisture-proof Pressure Transmitter | IIE/IIIE | General/Display Pressure Transmitter |
| IN | Air Conditioning Dedicated Pressure Transmitter | IC | High-temperature Pressure Transmitter |
| IQ/IQT | Large Diaphragm /High-temperature Pressure Transmitter | | |
| Measurement Range | -0.1. . .0～0.01．．．100MPa |
| (0-X)Kpa or MPa | X: Indicates the Actual Measuring Range |
| Code | Power Supply |
| D1 | 24VDC |
| D2 | 5VDC |
| D3 | Other |
| Code | Output Signal |
| S1 | 4～20mADC | S5 | 0～20mADC |
| S2 | 1～5VDC | S6 | 0～10VDC |
| S3 | 0～5VDC | S7 | 0.5～4.5VDC |
| S4 | 0～10mADC | | |
| Code | Pressure Connection |
| J1 | M20×1.5 |
| J2 | G1/2 |
| J3 | G1/4 |
| J4 | 7/16-20UNF |
| J5 | Other |
| Code | Electrical Connection |
| B1 | Hirschmann |
| B2 | PG7 Plug |
| B3 | Sealed Cable Output |
| B4 | 2088 Industrial Casing |
| B5 | 2088 Industrial Casing with Display |
| B6 | Other |
| Code | Pressure Type |
| G | Gauge Pressure |
| A | Absolute Pressure |
| S | Sealed Reference Pressure |
FAQ:
Q1:Are you manufactrade company?
A1:We are manufactrader with more than 29 years of experience.
Q2:Customized Product
A2:We provide OEM and Custom-Design services.
Q3:Quality Quarantee
A3:Our products have a limited 12 to 18 months warranty from
shipment date to the original purchaser.Hengtong will replace or
repair defective products free of charge.This warranty does not
apply to any units have been modified,misused,neglected.
Q4:Shipment&packing
A4:Products are generally shipped by international Express
including UPS,FedEx,DHL and INT for freight prepaid,also can use
your shipment account to collect,Standard export packing,including
inspection certification.
Q5:Contact US
A5:We have an active and experienced sales team to serve you on
technical question and business issue.Just leave us message or
click the Online Service.
