The BP156 mini Industrial pressure sensor transmitter is a compact
rod-shaped pressure transmitter. It incorporates a high-reliability
silicon piezoresistive pressure sensor as its sensitive core, and
undergoes temperature compensation, digital circuit correction, and
signal conditioning to output standard industrial applications and
network signals. Each product has undergone meticulous design,
parts screening, process verification and curing, cyclic loading
stress relief, aging, environmental simulation testing to ensure
stability and reliability.
Product Features of mini Industrial pressure sensor transmitter:
1. Wide measuring range, stainless steel structure.
2. Compact and lightweight design.
3. High precision, all stainless steel structure.
Applications of mini Industrial pressure sensor transmitter:
1. Pressure measurement of non-corrosive gases and liquids with
316L stainless steel.
2. Applied in the marine and aviation industries.
3. Used in industrial on-site processes such as petroleum,
chemical, metallurgy, power generation, and hydrology.
4. Utilized in hydraulic and pneumatic control systems.
| Performance Parameters of mini Industrial pressure sensor transmitter: |
| Measurement Range | 0kPa ~ 10kPa…20MPa |
| Pressure Type | Gauge Pressure, Absolute Pressure, Sealed Pressure |
| Overload | ≤ 1.5 times of the rated range |
| Accuracy @ 25ºC | ±0.25% (Typical) ±0.5% (Maximum) |
| Repeatability& Hysteresis | 0.02%F.S(Typ.) 0.05%F.S(Max.) |
| Long-Term Stability | ±0.1%F.S/Year(Typ.) ±0.2%F.S/Year(Max.) |
| Zero Point Temperature Drift | ±0.02%F.S/ºC(≤100KPa) ±0.01%F.S/ºC(>100KPa) |
| Full Scale Temperature Drift | ±0.02%F.S/ºC(≤100KPa) ±0.01%F.S/ºC(>100KPa) |
| Frequency Response | 2.4Khz |
| Compensation Temperature | 0-70ºC(≤10mpa,customizable) |
| Operating Temperature | -20ºC~80ºC |
| Storage Temperature | -40ºC~120ºC |
| Vibration | 10g,55Hz ~ 2kHz |
| Housing Material | 304,316L |
| Diaphragm Material | 316L |
| Insulation Resistance | 100MΩ 100VDC |
| Explosion-proof Rating | Ex ia IIC T6 Ga |
| Protection Rating | IP65 |
| Output Signal | Supply Voltage | Output Type |
| 4~20mA | 12~30VDC | 2/3/4 wire |
| 0~10/20mA |
3 wire |
| 0/1~5V |
| 0/1~10V |
| 0.5~4.5V | 5VDC |
| Selection Examples of mini DIN pressure transmitter sensor |
NOTE:
1. When selecting a product, please ensure that the medium under
test is compatible with the contact part of the product.
2. When placing an order, please note that explosion-proof products
do not include a digital display.
3. When ordering a transmitter with an LCD or LED display head, the
power supply of the transmitter should not be lower than 20VDC.
4. In order to ensure the reliable operation of the product, it is
recommended that users install lightning protection devices on the
site and ensure that the product and the power supply are reliably
grounded.
5. Fluorine rubber o-rings rated operating temperature range for -
20 ℃ ~ 250 ℃. When operating temperatures fall below -20 ° C, EPDM
O-type sealing rings should be selected.
6. The cable does not come with default cable attached. If you
require cable, there are three materials to choose from. If no
specific instructions are given, polyethylene cable materials will
be used by default.If different cable materials are required,
please indicate in your order form.
7.In case of special requirements such as strong vibration,
instantaneous impact,strong electromagnetic or radio frequency
interference ,please inform us and indicate in your order.
| Order Guide |
| BP15X | Analog Pressure Transmitter |
| Code | Outline Construction |
| 5 | Packard plug | 6 | Sealed Direct Output Cable 1.5 meters |
| 7 | Mini Hirschmann Connector | 8 | Large Hirschmann Connector |
| Measurement Range | 0kPa ~ 10kPa…5MPa |
(0-X)Kpa
or MPa | X: Indicates the Actual Measuring Range |
| Code | Power Supply |
| D1 | 24VDC |
| D2 | 5VDC |
| D3 | Other |
| Code | Output Signal | |
| S1 | 4~20mADC | S5 | 0~20mADC |
| S2 | 1~5VDC | S6 | 0~10VDC |
| S3 | 0~5VDC | S7 | 0.5~4.5VDC |
| S4 | 0~10mADC | | |
| Code | Pressure Connection |
| J1 | M20×1.5 |
| J2 | G1/2 |
| J3 | G1/4 |
| J4 | 7/16-20UNF |
| J5 | Others(¢50.4 Flange) |
| Code | Electrical Connection |
| B1 | Hirschmann |
| B2 | PG7 |
| B3 | Cable Sealed Outlet 1.5 meters |
| B4 | Other |
| Code | Pressure Type |
| G | Gauge Pressure |
| A | Absolute Pressure |
| S | Sealed Reference Pressure |
FAQ:
1. Q: What are the features of your pressure sensor transmitters?
A: Our pressure sensor transmitters are characterized by high
precision, durability, and excellent performance, with the option
for customization.
2. Q: Can I customize special specifications?
A: Yes, our engineers can tailor products to meet specific needs
through our OEM and ODM services.
3. Q: What is your production capacity?
A: Our manufacturing facilities have the capability to produce up
to 30,000 pressure sensor transmitters per month, ensuring that we
can fulfill large-scale orders. However, it is advisable to contact
our sales team in advance for smooth production and delivery
scheduling.
4. Q: What's the typical delivery period?
A: Standard models typically have a delivery period of 5~8 working
days, while customized products may vary.
5. Q: How are the products priced? Any discounts?
A: We offer competitive pricing with discounts available for bulk
orders or long-term partnerships.
6. Q: What is the warranty of your products? And after-sales
service?
A: Our products come with a 24-month warranty from shipment date,
and our after-sales service ensures prompt responses within 24
hours along with remote instruction support via PC network.
