BZP93420IB Smart Pressure Transmitter sensor
Introduction of smart pressure transmitter sensor:
BPZ93420-IB Intelligent pressure transmitter sensor adopts high
precision and high stability diffused silicon core as the pressure
sensor chip of the transmitter, advanced chip technology,
supporting high precision and high stability amplifier integrated
circuit with zero, full scale compensation, temperature
compensation, the pressure of the measured medium is converted into
RS485 standard communication signal. The product structure is made
of stainless steel, with high precision, good stability and
superior anti-interference ability. All products undergo fatigue
shock testing, high and low temperature cycle aging testing and
precision digital temperature compensation processes.
High quality sensor, precision amplifier circuit, strict production
process, perfect inspection and aging test equipment, to ensure
excellent product quality. The product is widely used in hydraulic
and pneumatic control systems; Petrochemical, environmental
protection, air compression; Power station operation inspection,
locomotive braking system; Thermoelectric unit; Light industry,
mechanical metallurgy; Building automation, constant pressure water
supply system; Other automation and inspection systems; Industrial
process inspection and control.
Product Features of smart pressure transmitter sensor:
1. Wide measuring range, stainless steel structure, diverse
pressure interface forms
2. Compact and lightweight design
3. High precision, all stainless steel structure.
4.Can add LED or LCD watch head, on-site display
Applications of smart pressure transmitter sensor:
1. Pressure measurement of non-corrosive gases and liquids with
316L stainless steel
2. Applied in the marine and aviation industries
3. Used in industrial on-site processes such as petroleum,
chemical, metallurgy, power generation, and hydrology
4. Utilized in hydraulic and pneumatic control systems
| Performance Parameters of smart pressure transmitter sensor |
| Measurement Range | -100kPa…0kPa ~ 10kPa…100MPa |
| Pressure Type | Gauge Pressure, Absolute Pressure, Sealed Pressure |
| Overload | ≤ 1.5 times of the rated range |
| Accuracy @ 25ºC | ±0.25% (Typical) ±0.5% (Maximum) |
| Repeatability | 0.1%FS |
| Hysteresis | 0.1%FS |
| Long-Term Stability | ±0.1%F.S/Year(Typical) ±0.2%F.S/Year(Maximum) |
| Zero Point Temperature Drift | ±0.03%F.S/ºC(≤100KPa) ±0.02%F.S/ºC(>100KPa) |
| Full Scale Temperature Drift | ±0.03%F.S/ºC(≤100KPa) ±0.02%F.S/ºC(>100KPa) |
| Compensation Temperature | 0-70ºC(≤10mpa,customizable) |
| Operating Temperature | -20ºC~80ºC |
| Storage Temperature | -40ºC~120ºC |
| Vibration | 10g,55Hz ~ 2kHz |
| Housing Material | 304,316L |
| Diaphragm Material | 316L |
| Insulation Resistance | 100MΩ 100VDC |
| Explosion-proof Rating | Ex db IIC T6 Gb |
| Protection Rating | IP65 |
| O-Ring Seal | Fluoro rubber |
| Weight | ~0.3kg |
| Output Signal | Supply Voltage | Output Type |
| 4~20mA(+HART) | 12~30VDC | 2/3/4 wire |
| 0~10/20mA |
3 wire |
| 0/1~5V |
| 0/1~10V |
| 0.5~4.5V | 5VDC |
| RS485 | 12~30VDC | 4 wire |
| Ordering tips of pressure transmitter sensor |
1. When selecting the product, please ensure that the tested medium
is compatible with the contact part of the product.
2. When placing an order, please note that explosion-proof products
do not include digital display heads.
3. When ordering with LCD or LED display head of transducer,
transmitter power should not be less than 20 VDC.
4. In order to ensure the reliable operation of the product, it is
recommended that users install lightning protection devices on site
and ensure that the product and power supply are reliably grounded.
5. The rated operating temperature range of fluorine rubber O-ring
is -20℃~ 250℃. When the operating temperature of the product is
lower than -20 ° C, EPDM O-type sealing ring should be selected.
6. The default cable length is 1.5m and there are three kinds of
materials to choose from. If there are no special instructions, no
cable or polyethylene cable material can be used. If you need a
different cable material, please specify it in the order form.
7. In case of strong vibration, instantaneous impact force, strong
electromagnetic or radio frequency interference and other special
requirements, please inform our company and indicate in the order.
| Order Guide of pressure transmitter sensor |
| BP93420XX | Pressure Transmitter |
| Code | Outline Construction |
| IB | General Pressure Transmitter | IX | Display Pressure Transmitter |
| IE | Shock-resistant Aviation Pressure Transmitter | IIC/III | Industrial General/ Display Pressure Transmitter |
| IF | Moisture-proof Pressure Transmitter | IIE/IIIE | General/Display Pressure Transmitter |
| IN | Air Conditioning Dedicated Pressure Transmitter | | |
| IC | High-temperature Pressure Transmitter | | |
| IQ1/IQ2 | Large Diaphragm /High-temperature Pressure Transmitter | | |
| Measurement Range | -0.1. . .0~0.01...100MPa |
| (0-X)Kpa or MPa | X: Indicates the Actual Measuring Range |
| Code | Power Supply |
| D1 | 24VDC |
| D2 | 5VDC |
| D3 | Other |
| Code | Output Signal |
| S1 | 4~20mADC | S5 | 0~20mADC |
| S2 | 1~5VDC | S6 | 0~10VDC |
| S3 | 0~5VDC | S7 | 0.5~4.5VDC |
| S4 | 0~10mADC | | |
| Code | Pressure Connection |
| J1 | M20×1.5 |
| J2 | G1/2 |
| J3 | G1/4 |
| J4 | 7/16-20UNF |
| J5 | Other |
| Code | Electrical Connection |
| B1 | Hirschmann |
| B2 | PG7 Plug |
| B3 | Sealed Cable Output |
| B4 | 2088 Industrial Casing |
| B5 | 2088 Industrial Casing with Display |
| B6 | Other |
| Code | Pressure Type |
| G | Gauge Pressure |
| A | Absolute Pressure |
| S | Sealed Reference Pressure |
