BPHT24-III Pressure Transmitter
Introduction of flush diaphragm pressure sensor transmitter:
BPHT24-III pressure transmitter is mainly used in the pressure
measurement of viscous liquid mud anti-scaling and
anti-crystallization oil shield machine. The whole adopts
integrated stainless steel structure, and the two kinds of flat
film structure with or without cavity can choose the material in
contact with the medium is 316L stainless steel and fluorine
rubber, which has good wear resistance and corrosion, good water
resistance, strong anti-interference and good long-term stability.
Easy to install., with high vibration resistance and impact
resistance.
Product Features of flush diaphragm pressure sensor transmitter:
1. A variety of pressure interface options.
2. Designed for health applications to prevent moderate scale.
3. High precision, all stainless steel structure.
4. Easy to clean, adjustable and display.
Applications of flush diaphragm pressure sensor transmitter:
1. Suitable for 316L non-corrosive gas and liquid measurement.
2. Suitable for environmental protection and chemical industry.
3. Used in the Marine and aviation industries.
4. Ideal for use in medical, biopharmaceutical and food hygiene
industries.
| Performance Parameters of flush diaphragm pressure sensor transmitter |
| Measurement Range | 0~35Kpa…~20MPa |
| Pressure Type | Gauge Pressure, Absolute Pressure, Sealed Pressure |
| Overload | ≤ 1.5 times of the rated range |
| Accuracy @ 25ºC | ±0.25% (Typical) ±0.5% (Maximum) |
| Repeatability& Hysteresis | 0.02%F.S(Typ.) 0.05%F.S(Max.) |
| Long-Term Stability | ±0.1%F.S/Year(Typ.) ±0.2%F.S/Year(Max.) |
| Zero Point Temperature Drift | ±0.02%F.S/ºC(≤100KPa) ±0.01%F.S/ºC(>100KPa) |
| Full Scale Temperature Drift | ±0.02%F.S/ºC(≤100KPa) ±0.01%F.S/ºC(>100KPa) |
| Frequency Response | 2.4Khz |
| Compensation Temperature | 0-70ºC(≤10mpa,customizable) |
| Operating Temperature | -20ºC~80ºC |
| Storage Temperature | -40ºC~120ºC |
| Vibration | 10g,55Hz ~ 2kHz |
| Housing Material | 304,316L |
| Diaphragm Material | 316L |
| Insulation Resistance | 100MΩ 100VDC |
| Explosion-proof Rating | Ex db IIC T6 Gb |
| Protection Rating | IP65 |
| O-Ring Seal | Fluoro rubber |
| Weight | ~0.8kg |
| Output Signal | Supply Voltage | Output Type |
| 4~20mA | 12~30VDC | 2/3/4 wire |
| 0~10/20mA |
3 wire |
| 0/1~5V |
| 0/1~10V |
| 0.5~4.5V | 5VDC |
| RS485 Communication Protocol | 3.6~30V / Battery | 4 wire |
| Outline Construction |
| Dimension |  |
1. When choosing products, please make sure that medium compatible
with contact part of the product being tested.
2. When placing an order, please note that explosion-proof products
do not include a digital display.
3. When ordering with LCD or LED display head of transducer,
transmitter power should not be less than 20 VDC.
4. To ensure the reliable operation of the product, it is
recommended that the user in the field installation of lightning
protection devices, and to ensure that products and power supply
reliable grounding.
5. Fluorine rubber o-rings rated operating temperature range for -
20 ℃ ~ 250 ℃.When the product operating temperature is lower than
-20℃, it is necessary to choose EPDM O-type seal ring.
6. The default cable length is 1.5m and there are three materials
to choose from. If there are no special instructions, polyethylene
cable materials can be used.If you require a different cable
material, please indicate it in the order.
7. In case of special requirements such as strong vibration,
instantaneous impact, strong electromagnetic or radio frequency
interference, please inform us and indicate in the order.
| Order Guide |
| BPHT24 | Pressure Transmitter |
| Code | Outline Construction |
| IX | Display Pressure Transmitter | IIC/III | Industrial General/ Display Pressure Transmitter |
| T | High-temperature resistant Pressure Transmitter | | |
| Measurement Range | 0~35Kpa…~20MPa |
| (0-X)Kpa or MPa | X: Indicates the Actual Measuring Range |
| Code | Power Supply |
| D1 | 24VDC |
| D2 | 5VDC |
| D3 | Other |
| Code | Output Signal |
| S1 | 4~20mADC | S5 | 0~20mADC |
| S2 | 1~5VDC | S6 | 0~10VDC |
| S3 | 0~5VDC | S7 | 0.5~4.5VDC |
| S4 | 0~10mADC | | |
| Code | Pressure Connection |
| J1 | M20×1.5 |
| J2 | G1/2 |
| J3 | G1/4 |
| J4 | 7/16-20UNF |
| J5 | Other |
| Code | Electrical Connection |
| B1 | Hirschmann |
| B2 | PG7 Plug |
| B3 | Sealed Cable Output |
| B4 | 2088 Industrial Casing |
| B5 | 2088 Industrial Casing with Display |
| B6 | Other |
| Code | Pressure Type |
| G | Gauge Pressure |
| A | Absolute Pressure |
| S | Sealed Reference Pressure |
FAQ:
1. Q: What are the features of your pressure sensor transmitters?
A: High precision, durability, and excellent performance.
Customization available.
2. Q: Can I customize special specifications?
A: Yes, our engineers can tailor products to meet specific needs. We provide OEM and ODM service.
3. Q: What is your production capacity?
A: Our manufacturing facilities can produce up to 30,000 pressure
sensor transmitters per month, so we are fully capable of meeting
the needs of large-scale orders. However, it is advisable to
contact our sales team in advance to ensure smooth production and
delivery scheduling.
4. Q: What's the typical delivery period?
A: 5~8 working day for standard models. Customized products may
vary.
5. Q: How are the products priced? Any discounts?
A: Competitive pricing with discounts for bulk orders or long-term
partners.
6. Q: What is the warranty of your products? And after-sales
service?
A: Our warranty time is 24 months after shipment, and our
after-sales will respond with your questions in 24hrs, remote
instruction by PC network is always available.
