HT15V Piezoresistive Silicon Pressure Sensor
Introduction of 15mm silicon pressure sensor:
V is a silicon piezoresistive pressure sensor with a constant
voltage power supply and an output control of 10mv/V. It uses the
piezoresistive effect of diffused silicon to accurately measure
liquid and gas pressures.V silicon pressure sensor is only 15 mm in
diameter, belongs to the exquisite type pressure sensor. The sensor
is widely used in a variety of small equipment requiring small
size.Our company can also undertake special customization based on
the needs of users, such as pressure sensors of all welded
structure, wide temperature compensation, high reliability,
anti-shock and anti-vibration sensors, especially for national
defense weapons and equipment.
Product Features of 15mm silicon pressure sensor:
- Utilizes advanced technology and is encapsulated in a 316L
stainless steel housing
- Wide measuring range 0~350KPa~60MpaS
- High reliability and excellent stability
- Constant voltage supply
Applications of 15mm silicon pressure sensor:- Suitable for measuring non-corrosive gas and liquid pressure with
316L stainless steel compatibility
- Compact design, ideal for applications with limited space
- Used in process control systems for monitoring and controlling
pressure
- Commonly used in refrigeration systems and air compressors for
pressure measurement
Electrical performance of 15mm silicon pressure sensor:- Power Supply: ≤10VDC
- Common Mode Voltage Output: 50% of the input (typical)
- Input Impedance:4KΩ~20KΩ
- Output Impedance:2.5KΩ~6KΩ
- Electrical Connection:100mm high-temperature wire,ribbon cable
| Performance Parameters of 15mm silicon pressure sensor: |
| Measurement Range | Gauge(G) | 350KPa,1000KPa,2000Kpa |
| Absolute(A) | 350KPaA,700KPaA,1000KPaA,2000KPaA |
| Sealed(S) | 3500KPaS,7MPaS,10MPaS |
| Typ | Max | Unit |
| NonLinearity | ±0.15 | ±0.3 | %F.S |
| Repeatability | 0.05 | 0.1 | %F.S |
| Hysteresis | 0.05 | 0.1 | %F.S |
| Zero Offset Output | 0±1 | 0±2 | mV |
| Full Scale Output | 100±1 | 100±2 | mV | |
| Zero Offset Temp. Drift | ±0.8 | ±2 | %F.S | |
| Full Scale Temp. Drift | ±0.8 | ±2 | %F.S | |
| Compensated Temp. | 0~70 | ºC | |
| Operating Temperature | -20~80 | ºC | |
| Storage Temperature | -40~125 | ºC | |
| Allowable Overload | Take the smaller value between 3 times the full scale or 80MPa | | |
| Burst Pressure | 5X the full scale | | |
| Long-term Stability | 0.2 % | F.S/Year | |
| Diaphragm Material | 316L | | |
| Insulation Resistance | ≥200MΩ 100VDC | | |
| Vibration | No change under conditions of 10gRMS, 20Hz to 2000Hz | | |
| Shock | 100g,11ms | | |
| Response Time | ≤1ms | | |
| O-ring Seal | Nitrile rubber or Fluoro rubber | | |
| Filling Medium | Silicon Oil | | |
| Weight | ~20g | | |
| The parameters are tested under the following conditions: 10V @25ºC | |
| Outline Construction |
| Dimension |  |
| Electrical connection and compensation |
|
1. In the assembly to pay attention to the core shell size and
transmitter to cooperate, in order to achieveAirtight requirement
2. During the assembly of the housing, ensure that it is vertically
aligned and evenly applied pressure to avoid jamming or damage to
the compensation plate.
3. If the tested medium is not compatible with the core diaphragm
and housing material (316L), special instructions should be
provided when placing the order.
4. Avoid pressing the sensor diaphragm by hand or sharp object to
avoid deformation or puncture of the diaphragm and damage to the
core.
5. Keep the pressure inlet of the negative pressure chamber of the
gauge pressure sensor open to the atmosphere to prevent water,
water vapor or corrosive media from entering the negative pressure
chamber of the gauge pressure core.
6. If there are any change pin, please according to the label on
the actual conductor for reference.
1.Q: What are the features of your pressure sensor transmitters?
A: High precision, durability, and excellent performance.
Customization available.2.Q: Can I customize special specifications?
A: Yes, our engineers can tailor products to meet specific needs. We provide OEM and ODM service3.Q: What is your production capacity?
A: Our manufacturing facilities can produce up to 30,000 pressure
sensor transmitters per month, so we are fully capable of meeting
the needs of large-scale orders. However, it is advisable to
contact our sales team in advance to ensure smooth production and
delivery scheduling
.4.Q: What's the typical delivery period?
A: 5~8 working day for standard models. Customized products may
vary.5.Q: How are the products priced? Any discounts?
A: Competitive pricing with discounts for bulk orders or long-term
partners
.6.Q: What is the warranty of your products? And after-sales
service?
A: Our warranty time is 24 months after shipment, and our
after-sales will respond with your questions in 24hrs, remote
instruction by PC network is always available.
