BP93420IB Pressure Transmitter sensor
Introduction of pressure transmitter sensor:
The BP93420IB Pressure Transmitter sensor is a measuring device
that detects the pressure of a liquid, gas or steam medium and
converts it to a standard electrical output. It detects pressure
changes through a built-in pressure sensor, converting the physical
quantity of pressure into a corresponding electrical signal, such
as 4-20mA, 0-5V or digital signals.
The pressure transmitter is composed of isolation film, sensor and
electronic circuit. When the pressure medium acts on the isolation
film, the isolation film will be slightly deformed. The deformation
is detected by the sensor and converted into the corresponding
electrical signal. The electronic circuit amplifies and corrects
the electrical signal, and finally outputs the standard
current/voltage/digital signal
| Performance Parameters of pressure transmitter sensor |
| Measurement Range | -100kPa…0kPa ~ 10kPa…100MPa |
| Pressure Type | Gauge Pressure, Absolute Pressure, Sealed Pressure |
| Overload | ≤ 1.5 times of the rated range |
| Accuracy @ 25ºC | ±0.25% (Typical) ±0.5% (Maximum) |
| Repeatability | 0.1%FS |
| Hysteresis | 0.1%FS |
| Long-Term Stability | ±0.1%F.S/Year(Typical) ±0.2%F.S/Year(Maximum) |
| Zero Point Temperature Drift | ±0.03%F.S/ºC(≤100KPa) ±0.02%F.S/ºC(>100KPa) |
| Full Scale Temperature Drift | ±0.03%F.S/ºC(≤100KPa) ±0.02%F.S/ºC(>100KPa) |
| Compensation Temperature | 0-70ºC(≤10mpa,customizable) |
| Operating Temperature | -20ºC~80ºC |
| Storage Temperature | -40ºC~120ºC |
| Vibration | 10g,55Hz ~ 2kHz |
| Housing Material | 304,316L |
| Diaphragm Material | 316L |
| Insulation Resistance | 100MΩ 100VDC |
| Explosion-proof Rating | Ex ia IIC T6 Ga |
| Protection Rating | IP65 |
| O-Ring Seal | Fluoro rubber |
| Weight | ~0.25kg |
| Output Signal | Supply Voltage | Output Type |
| 4~20mA | 12~30VDC | 2/3/4 wire |
| 0~10/20mA |
3 wire |
| 0/1~5V |
| 0/1~10V |
| 0.5~4.5V | 5VDC |
Product Features of pressure transmitter sensor:
- The pressure transmitter features a wide measuring range, a durable
stainless steel structure, and various pressure interface options
to accommodate different application needs.
- Its compact and lightweight design allows for easy installation and
integration into space-constrained environments.
- With high precision and an all stainless steel structure, this
pressure transmitter ensures accurate and reliable pressure
measurements.
- Additionally, it offers the option to add an LED or LCD display
head for convenient on-site pressure monitoring and display.
Applications of pressure transmitter sensor:
- Pressure transmitters are widely used in various industries, such
as petrochemical, metallurgy, electric power, aerospace,
environmental protection and other fields.
- They are used to monitor the pressure of pipes, containers, storage
tanks and other equipment to ensure a safe and reliable production
process. In addition, pressure transmitters are also used in
scientific research fields such as meteorology and hydrology
| Ordering tips of pressure transmitter sensor |
1. When selecting the product, please ensure that the tested medium
is compatible with the contact part of the product.
2. When placing an order, please note that explosion-proof products
do not include digital display heads.
3. When ordering with LCD or LED display head of transducer,
transmitter power should not be less than 20 VDC.
4. In order to ensure the reliable operation of the product, it is
recommended that users install lightning protection devices on site
and ensure that the product and power supply are reliably grounded.
5. The rated operating temperature range of fluorine rubber O-ring
is -20℃~ 250℃. When the operating temperature of the product is
lower than -20 ° C, EPDM O-type sealing ring should be selected.
6. The default product is without cable, if necessary, please
communicate with the sales staff. There are three materials to
choose from. Do not use cable or polyethylene cable material
without special instructions.If you require a different cable
material, please indicate it in the order.
7. In case of strong vibration, instantaneous impact force, strong
electromagnetic or radio frequency interference and other special
requirements, please inform our company and indicate in the order.
| Order Guide of pressure transmitter sensor |
| BP93420XX | Pressure Transmitter |
| Code | Outline Construction |
| IB | General Pressure Transmitter | IX | Display Pressure Transmitter |
| IE | Shock-resistant Aviation Pressure Transmitter | IIC/III | Industrial General/ Display Pressure Transmitter |
| IF | Moisture-proof Pressure Transmitter | IIE/IIIE | General/Display Pressure Transmitter |
| IN | Air Conditioning Dedicated Pressure Transmitter | | |
| IC | High-temperature Pressure Transmitter | | |
| IQ1/IQ2 | Large Diaphragm /High-temperature Pressure Transmitter | | |
| Measurement Range | -0.1. . .0~0.01...100MPa |
| (0-X)Kpa or MPa | X: Indicates the Actual Measuring Range |
| Code | Power Supply |
| D1 | 24VDC |
| D2 | 5VDC |
| D3 | Other |
| Code | Output Signal |
| S1 | 4~20mADC | S5 | 0~20mADC |
| S2 | 1~5VDC | S6 | 0~10VDC |
| S3 | 0~5VDC | S7 | 0.5~4.5VDC |
| S4 | 0~10mADC | | |
| Code | Pressure Connection |
| J1 | M20×1.5 |
| J2 | G1/2 |
| J3 | G1/4 |
| J4 | 7/16-20UNF |
| J5 | Other |
| Code | Electrical Connection |
| B1 | Hirschmann |
| B2 | PG7 Plug |
| B3 | Sealed Cable Output |
| B4 | 2088 Industrial Casing |
| B5 | 2088 Industrial Casing with Display |
| B6 | Other |
| Code | Pressure Type |
| G | Gauge Pressure |
| A | Absolute Pressure |
| S | Sealed Reference Pressure |
FAQ:
1. Q: What are the features of your pressure sensor transmitters?
A: High precision, durability, and excellent performance.
Customization available.
2. Q: Can I customize special specifications?
A: Yes, our engineers can tailor products to meet specific needs. We provide OEM and ODM service.
3. Q: What is your production capacity?
A: Our manufacturing facilities can produce up to 30,000 pressure
sensor transmitters per month, so we are fully capable of meeting
the needs of large-scale orders. However, it is advisable to
contact our sales team in advance to ensure smooth production and
delivery scheduling.
4. Q: What's the typical delivery period?
A: 5~8 working day for standard models. Customized products may
vary.
5. Q: How are the products priced? Any discounts?
A: Competitive pricing with discounts for bulk orders or long-term
partners.
6. Q: What is the warranty of your products? And after-sales
service?
A: Our products have a limited 12 to 18 months warranty from shipment
date to the original purchaser.Hengtong will replace or repair
defective products free of charge.This warranty does not apply to
any units have been modified,misused,neglected.
